Call (281) 376-3784 to order today info@appliedoiltools.com

 

Coil Tubing Tools Overview

Our complete line of coil tubing tools is made for reliable, efficient and affordable well intervention and drilling operations. Designed to provide solutions for all situations, our products will fit your unique needs. All products are available in standard and custom sizes.

Available Products

FLAPPER CHECK VALVE

13-3000

The Flapper Check Valve is designed to prevent well pressure from entering into the coiled tubing or jointed tubing. This tool can be used with most thru tubing tools and can be run below the connector if an MHA is not required or if a Hydraulic Disconnect is to be run further down the assembly.

 

View Product

HYDRAULIC DISCONNECT

68-3250

This tool allows the operator a method to release the coiled tubing from the tool string. Its robust design allows for heavy jarring. It is anti-rotational, so it can be used with rotating tools and can be run directly above a motor or vibrating tool. Pumping a steel ball down through the coiled tubing and seating it in the sleeve shears the brass shear screws and moves the sleeve down, releasing the retainer lugs. Once released, there is circulation through the tool. The bottom sub has an internal fishing neck and may be latched onto with a standard pulling tool. The Hydraulic Disconnect has four shear screws and the pressure needed to release the tool ranges from 600 to 2500 PSI per screw.

 

View Product

Internal Connector

Our Internal Connectors are a part of our unique line of coiled tubing wellhead hangers used for remedial well servicing and workover operations of oil and gas wells. They offer customers the ability to land and retrieve coiled tubing under wellhead pressure without the need to kill the well. We also offer a lower cost tubing hanger utilizing slip and seal or mandrel hangers. All hangers are rated for H2S service and are available in standard or custom threaded sizes.

 

View Product

KNUCKLE JOINT

69-1200

The Knuckle Joint is a sealed pressure tool that contains units with flow-through capabilities and gives the operator the flexibility to go through restrictions. It may be used in conjunction with downhole tool strings and, depending on the size, is rated between 15,000 and 35,000 pounds.

 

View Product

Roll On Connectors

15-2800

Our Roll On Connector is a part of our unique line of coiled tubing wellhead hangers used for remedial well servicing and workover operations of oil and gas wells. They can be used with wash or jetting assemblies and offer customers the ability to land and retrieve coiled tubing under wellhead pressure without the need to kill the well. We also offer a lower cost tubing hanger utilizing slip and seal or mandrel hangers. All hangers are rated for H2S service and are available in standard or custom threaded sizes.

 

View Product